Our product
make your life more
1、 Function of temperature rising dehumidifier
It can reduce the air humidity of the installed room and adjust the indoor temperature, so that people can live comfortably or store things in it. The heating dehumidifier has the characteristics of beautiful appearance, compact structure and simple operation. It is widely used in scientific research, medical and health care, commodity storage, underground engineering, kitchen, bathroom, archives, warehouse and other high humidity places to dehumidify. It can prevent the loss of instruments, meters, telecommunication equipment, drugs and materials caused by moisture, corrosion and mildew.
2、 Applicable environment of temperature rise dehumidifier:
1. Ambient temperature: 5-55 ℃, 380V industrial power supply.
2. Generally, the distance between dehumidifier and wall and other obstacles should be more than 600mm.
3. In order to prevent condensation inside the heating dehumidifier, the unit should not be exposed to the environment with the temperature lower than the dew point of the treated air.
4. The heating dehumidifier shall be installed in a ventilated place, away from strong electromagnetic, oil fume, sand and dust places, and away from corrosive gas and any explosion dangerous place with combustible gas and vapor mixed with air.
5. Drainage device should be set around the unit to drain condensate.
3、 How to select the type of heating dehumidifier
The temperature range and the water evaporation per unit time of the dehumidifier should be paid attention to when selecting the type of dehumidifier because it works in the drying room, laboratory and other special conditions.
Professional heating dehumidifier supplier is based on the overall humidity load of the site. Specifically, the dehumidifier selection is based on the comprehensive factors such as area, floor height, drying moisture evaporation, initial humidity value, target humidity value, indoor airtight degree, scattered humidity source, fresh air supply and other comprehensive factors to calculate the total cooling capacity, dehumidification capacity per unit time and other key parameters. The dehumidification effect of the dehumidifier depends on the humidity of the current environment. The larger the area, the longer the time.
4、 Notes on the use of dehumidifier
1. Before use, please confirm that the power supply voltage is 380V / 50Hz.
2. Do not stop the dehumidifier by pulling out the power cord.
3. Be careful not to roll and damage the power cord when moving.
4. Do not put fingers or sticks into the air intake grille.
5. Do not wet the plug of the power cord before cleaning and servicing.
6. Do not let children climb and sit on the top of the dehumidifier.
7. It is recommended to use proper power switch instead of plug. It must be grounded safely.
5、 Maintenance:
The machine must be shut down and power supply cut off before maintenance;
It is forbidden to climb or stand on the machine. When cleaning the filter screen, do not wet the humidity sensor of the air inlet. It is strictly forbidden to clean the fan blades under the start-up state;
After the machine is installed, the machine body cannot be moved directly, otherwise the machine will be damaged.
