News center
make your life more
Why industrial dehumidifier is needed in industrial production
At that time, when the humidity was abnormal, the on-site condition of the adhesive sheet was described as follows: all the tables, chairs, benches, glass, equipment, wafers, chips and the surface of anti-static clothing on people’s bodies had serious water vapor. The water vapor on the glass made the indoor people can’t see the corridor clearly. When touching the surfaces of tables and chairs with hands, there were obvious water marks of fingers. What’s more serious is that there are a lot of chips stored in the chip bonding process. All of these products include other series of products, all of which are like having gone through a & quot; steam bath & quot. After that, ultrasonic scanning was carried out on the unqualified crystals with high scrap rate, and it was found that there were different degrees of delamination. After dissection, it was found that cracks occurred at the separation layer, gold wire fracture and some chips appeared cracks. Finally, the conclusions are as follows: (1) the main reason for the decline of yield is the cracks at the separation layer, which leads to chip cracks or gold wire fracture. (2) The reason for the separation layer is that the water vapor on the chip surface is encapsulated in the plastic package. Thus, the temperature and humidity have a significant impact on IC packaging production. the humidity problems caused by water quality and heat source are often troubling the normal work of program-controlled room, computer room and electronic workshop. This is just the demand of dehumidifier in electronic industry, and many other industries also need industrial dehumidifier. why does industrial production need industrial dehumidifier? Industrial dehumidifier can solve the problem of high humidity in industrial production. Using industrial dehumidifier to control humidity can provide a good working environment for industrial production, which plays an important role in improving product quality! many dehumidifier manufacturers will maximize the space as much as possible in order to save costs For example, most of the basement will be used as a warehouse to place goods. However, the basement is located below the surface of the ground, the warehouse without industrial dehumidifier will be very humid in the plum rain season, and the air flow is not large, so it is not easy to spread. Therefore, the basement is more humid than the room on the ground, which is not conducive to the storage of finished products and some goods with humidity requirements. Then the trouble comes, how can we keep the basement warehouse dry and even control the humidity value of the basement? This is an important issue. if the temperature is not high and the humidity is too high, the raw materials, semi-finished products and finished products produced by the enterprise will cause losses in the storage process. All kinds of production equipment will also rust and corrode, which will lead to the product quality discount. So it is very necessary to have an industrial dehumidifier to completely solve the problem. Of course, there are also some economic dehumidification methods, that is, manual dehumidification with lime and other hygroscopic substances. Exhaust box can also be installed for ventilation, but the effect is not good.
